14
Gas hob instructions for use
Cleaning
4 Cleaning and Maintenance
4.1 Hob
Periodically wash the hot plate, the enamelled steel pan support, the enamelled burner caps “A”, “B” and
“C” and the burner heads "T" (see fig. 5 and 6) with lukewarm soapy water. They should also be cleaned
plugs "AC" and flame detection "TC" (see fig. 6). Clean them gently with a small nylon brush as shown
(see fig. 7) and allow to dry fully.
Do not wash the component in the dishwasher. It is very important to clean the surface soon after every
use.
Do not allow vinegar, coffee, milk, salted water, lemon or tomato juice from remaining in contact with the
enamelled surfaces for long periods of time.
Do not clean using abrasive metal scourers, powder abrasives or corrosive sprays a damp sponge is
sufficient.
WARNINGS:
when reassembling the components, observe the following recommendations:
– Check that the holes in the burner heads “T” (fig. 5) are not blocked by foreign bodies.
– Ensure that the enamelled covers “A”, “B” and “C” (fig. 5 and 6) are correctly positioned on
the burner head. The covers are correctly positioned on the head when they are perfectly
stable.
– If the opening and closing of any valve is awkward, do not force it but request urgent
intervention by the technical assistance service.
– The pan support must be placed in the appropriate centering pins verifying the perfect
stability.
– Do not use jets of steam to clean the appliance.
– To prevent difficulties with lighting, regularly clean the ignition elements (ceramic and
electrode) and safety cut-off devices (fig.7).
Summary of Contents for GKS3820.0ED-HK
Page 20: ...Version 1 2018...
