Kuppersbusch GKS3820.0ED-HK, Instructions For Use And Installation, Page: 14 / 20

13
Gas hob instructions for use
Installation and Operation
3.4.1 Lighting and Using The "Wok" Burner
Stand the pan on the burner before lighting.
Despite being controlled by a single knob, the “Wok” burner can be used in two different ways.
A) - Using the complete burner:
Starting from the off position ● You must first press the knob, simultaneously turning it anti-clockwise,
Until the indicator points to the maximum delivery position obtaining the maximum flow capacity of both
flames.
When the flames are lit, keep the knob pressed for a few seconds, until the device automatically keeps
the burner lit.
It is now possible to regulate the intensity of the flame by turning the knob anti-clockwise (from the
maximum flow capacity position of the inner and outer flames to the maximum flow capacity of the inner
flame and the minimum of the outer flame.
To turn off the burner, turn the knob clockwise, realigning the indicator with the ● off symbol.
B) - Using the inner flame only:
After lighting the burner and regulating the inner flame to maximum flow capacity and the outer flame
to minimum flow capacity as described above, turn the knob anti-clockwise until it clicks once. The
inner flame is now at maximum flow capacity while the outer flame is turned off. Continue turning anti-
clockwise to regulate the inner flame to the minimum flow capacity.
3.4.2 Lighting burners fitted with a safety cut-off device
○ For burners fitted with a safety cut-off device, turn the knob corresponding to the burner to use
anti- clockwise to the “Maximum” position until it stops and then press the knob.
○ Continue pressing the knob for about 10 seconds after the burner has been lit.
○ Should the flames accidentally go out, turn the burner control knob off and wait at least 1 min
before attempting to light it again.