10
Service Manual GCM 642.0 ME/GES 642.0
For internal use only
3.3 Installing the seal between hob and worktop
a)
Before the appliance is connected to electricity or gas, a seal must be
installed between the hob and the worktop. This seal is glued onto the
underside of the hob frame.
b)
Press the self-adhesive sponge rubber seal around the hob frame starting
from the centre at the back (see Fig.).
After installation the seal must be in the position as shown in the illustration.
Do not use additional silicon or similar: Otherwise, when the hob is removed,
the worktop could be damaged.
3.4 Making the gas connection
3.5 Installing the hob
a)
Insert the hob into the worktop opening.
b)
The pins on the side panelling sheets must engage the spring catches in the
hob.
c)
Press the hob edge by hand lightly.
3.6 Installing the control panel
a)
Hold the control panel in front of the prepared opening and insert the two
connection lines with 6 and 9-pole plug into the connection bushes of the
control panel.
Do not use force. The shape and size of the plugs prevent them from being
inserted the wrong way round.
b)
Guide the electric cable of the control panel through the opening in the
bottom cupboard to the rear.
Seal
Hob
Glass ceramic top
