Kuppersbusch EKI 6130, Service Manual

Page: 9 / 25

Service Manual 9
For internal use only
Every failure type 2 (that concerns one IPC only) is shown on the displays that are associated to that IPC.
Every failure type 2 (that concerns one IPC only) is shown on the displays that are associated to that
IPC. Supposing to have the error coded with F23 for the IPC1, it will be shown intermittently “F F” and
“2 3” on those displays. (See pictures below - Each frame is shown for one second on the USIF.)
7.1.3 Failure type 3
Failure type 3 comes from the USIF. These failures do not allow the user to utilize the whole hob. When
this type of failure occurs the USIF switches OFF all the cooking zones present on the hob sending down
power levels equal to zero, and it becomes insensitive to subsequent changes of settings on the whole
hob. If the user presses the buttons related to any one of the zones, then a long beep is emitted.
Every failure type 3 concerns the whole hob. It is shown on all the displays.
Supposing to have the error coded with F31, it will be shown intermittently “F F F F”, “3 3 3 3” and
“1 1 1 1”. (See pictures below - Each frame is shown for one second on the USIF.)
Every failure is shown on the USIF when it occurs. If the failure does not occur anymore then the hob
starts to work regularly.