background image

EKI 307

19

What to do if trouble occurs

Unplug the appliance before repair!

First check whether there has been any operating error. You can deal with 
some problems that occur yourself. 

Important note:

Repairs should only be carried out by a qualified gas fitter! 
Even during the guarantee period repairs will not be free of charge if due to 
incorrect operation or to non-adherence to our instructions given under “What 
to do if trouble occurs”.

Always indicate the data provided on the rating label when calling in Customer 
Service or ordering spare parts. The rating label is located at the bottom side 
of the hob. It is also stuck onto the cover page of this operating manual.

Fault

Cause

Remedy

Not possible to 
switch off the 
appliance.

Electronic component 
defective.

Remove pot from cooking 
zone, switch off the fuse, 
call Customer service.

LED display for 
cooking settings and 
heat display does 
not come on or only 
partially.

LED display defective.

Call Customer service. 
Risk of burning, as the 
temperature warning is not 
guaranteed.

Pot does not 
become hot.

Unsuitable cookware 
(non-magnetic, 
ferromagnetic, pot 
diameter too small) -

 in the display.

Use suitable cookware.

Sensor-lock not 
deactivated.

Deactivate sensor-lock.

Electronics error -

in the display.

Call Customer service. 
(Cooking areas which still 
work can continue to be 
used until the customer 
service staff arrive).

Thermal limit of the 
power – 
Flashing of the cooking 
setting display.

Wait until hob cools down.

Plug or household fuse 
defective – 
Displays dark.

Check or replace plug or 
fuse.

Cooling of the induction 
element overloaded.

Air short-circuit – Hot air/
cold air can impair cooling,
Allow appliance to cool 
down.

Sensors do not react 
to touch.

Pots, wet cleaning cloths 
etc. in control area.

Clear away, clean and dry 
the glass in the control 
area,
if necessary call Customer 
service.

Noises when using 
pots of some makes.

Design of the pots.

Unavoidable as due to 
make. 
(Noises may be reduced by 
selecting the next cooking 
setting).

All manuals and user guides at all-guides.com

Summary of Contents for EKI 307.0












Reviews: