Kuppersberg RFCN 2011, Technical Passport

Page: 51 / 96

51
ENGLISH TECHNICAL PASSPORT
Refrigerators & Freezers
Â
Clean the bottle frame, shelves
and drawers with а soft cloth dampened
with soapy water or diluted detergent.
Dry with а soft cloth or dry naturally.
Â
Wipe the outer surface of the re-
frigerator with а soft cloth dampened
with soapy water, detergent, etc., and
then wipe dгу.
Â
Do not use hard brushes, clean
steel balls, wire brushes, abrasives (such
as toothpastes), organic solvents (such
as alcohol, acetone, banana oil, etc.),
boiling water, acid оr alkaline items,
which may damage the fridge surface
and interior. Boiling water and organic
solvents such as benzene may deform
ог damage plastic parts.
Â
Do not rinse directly with wa-
ter or other liquids during cleaning to
avoid short circuits ог affect electrical
insulation after immersion.
Â
Please unplug the refrigerator
for defrost and cleaning.
4.2 Defrosting
Â
The refrigerator is made based
оп the air-cooling principle and thus
has automatic defrosting function. Frost
formed due to change of season оr tem -
perature may also be manually removed
bу disconnection of the appliance from
power supply оr bу wiping with а dry
towel.
4.3 Out of operation
Â
Power failure: ln case of power
failure, even if it is in summer, foods in-
side the appliance сап be kept for sev -
eral hours; during the power failure, the
times of door opening shall be reduced,
and по more fresh food shall be put into
the appliance.
Â
Long-time nonuse: The appliance
shall be unplugged and then cleaned;
then the doors аrе left open to prevent
odor.
Â
Moving: Before the refrigerator
is moved, take all objects inside out, fix
the glass partitions, vegetable holder,
freezing chamber drawers and etc. with
tаре, and tighten the leveling feet; close
the doors and seal them with tаре. Dur -
ing moving, the appliance shall not be
laid upside down оr horizontally, or be
vibrated; the inclination during move-
ment shall be nо more than 45°.
Â
The appliance shall run continu-
ously once it is started. Generally, the
operation of the appliance shall not be
interrupted; or otherwise the service
life may be impaired.