7
english
Technical passporT
refrigerator noFF 18769
Use of a non-earthed socket :
Â
Connect the “earthed wire” to the
steel plate and bury it at depth of at
least 25cm in the ground.
LEVELING
If the front of the appliances slightly
higher than the rear, the door can be
opened and closed more easily.
1. The appliance tilts down to the left.
Turn the left adjusting leg in
the direction of the arrow until the
appliance is lever.
2. The appliance tilts down to the right.
Turn the right adjusting leg in
the direction of the arrow until the
appliance is lever.
PREPARING THE FRIDGE / FREEZER
To Prepare your appliance for use and
check that it is running correctly, take
the following steps.
3. Install removed all shelves and
compartments during transport in
the correct positions.
4. Clean the fridge / freezer and
accessories to remove any dust that
accumulated during packing and
shipping.
5. The interior light should be turned
on when the refrigerator door’s
opened
6. Set the temperature control to the
coldest temperature and let the
refrigerator operate for one hour. The
freezer should get slightly chilled
and the motor should run smoothly
with a soft hum and no noise. Your
fridge / freezer is operated by a
compressor which switches “on
and off” to maintain the internal
temperature. When compressor is
new, it requires running in for a
period of up to fi ve months. During
this period, it may be slightly noisy.
This is quite normal and does not
represent a fault.
7. Store food once the temperature in
the refrigerator is suffi ciently low.
It takes a few hours after starting
the refrigerator to reach the proper
temperature.
If the appliance does not operate
correctly, check the electricity supply.
If the problem persists, contact your
dealer.
