Kuppersberg HO 658 T, Manual

Page: 11 / 52

11
English TEchnical passporT
Electric oven
Â
Set the required time using the
sensors < / > within a range from 1
minute to 10 hours.
Â
Press sensor MENU until the
display will show:
Â
Set the switch–off time
(operation end time) using sensors < / >,
which is limited to a period of 23 hours
and 59 minutes from the current time.
Â
Set the oven function knob and
the tem perature regulator knob to the
setting at which you want the oven to
operate.
The signal lights by and are
now on; the oven will start operating
from the point when the difference
between the set operation end time and
the operation duration time occurs (e.g.
the operation time is set to 1 hour, the
operation end time is set to 14.00, so the
oven will start working automatically at
13.00).
The function AUTO is now on; the
oven will start operating from the point
when the differ ence between the set
operation end time and the operation
duration time occurs (e.g. the operation
time is set to 1 hour, the operation end
time is set to 14.00, so the oven will
start working automatically at 13.00).
When the oven reaches the operation
end time it will switch off automatically,
the alarm will be activated and the
function AUTO will start fl ashing again.
Â
Set the oven function knob and
the tem perature regulator knob to the
switched–off position.
Â
Press sensor MENU, < / > in order
to switch off the alarm; the function
AUTO will go out and the display will
show the current time.
Cancel settings
Timer and automatic function
settings may be cancelled at any time.
Cancel automatic function settings:
Â
press sensors < / > simultaneously,
Cancel timer settings:
Â
press sensor MENU to select
timer settings,
Â
press sensors < / > again,
Change the timer beeps
The tone of the timer beeps may be
changed as follows:
Â
press sensors < / > simultaneously,
Â
select “tone” function with the
1 sensor, the display panel will start to
blink: