Kuppersberg GS 6005, Technical Passport, Page: 13 / 64

13
ENGLISH TECHNICAL PASSPORT
Dishwasher
differences are possible. Please observe
the manufacturer’s recommendations
on the detergent packaging.
Detergents
There are 3 sorts of detergents
1. With phosphate and with chlorine
2. With phosphate and without
chlorine
3. Without phosphate and without
chloride.
Normally new pulverized detergent
is without phosphate. The water
softener function of phosphate is not
given. In this case we recommend to
fi ll salt in the salt container even when
the hardness of water is only 6 dH. If
detergents without phosphate were
used in case of hard water often white
spots appear at dishes and glasses. In
this case please add more detergent to
reach better results. Detergents without
chlorine do only bleach a little. Strong
and coloured spots will not removed
completely. In this case please choose
a programme with higher temperature.
Use of «3 in 1» Detergent
Tablets
General Advice
1. Before using these products
you should fi rst check that the
water hard-ness in your supply is
compatible with the use of these
products as per the detergent
manufacturers instructions (on the
product packaging).
2. These products should be strictly
used according to the detergent
manufacturers instructions.
3. If you encounter problems when
using «3 in 1» products for the
fi rst time then please contact the
detergent manufacturers care line
(the telephone number is given on
the product packaging).
These products are detergents with
integrated and combined detergent/
rinse aid and salt functions. Before
using these products you should fi rst
check that the water hardness in your
supply is compatible with the use of
these products as per the detergent
manufacturers (on the product
packaging).
Special Advice
When using combination products,
the rinse-aid and salt lights are no
longer useful. It may be helpful to select
the lowest possible setting for water
hardness.
To select «3 in 1» function:
1. Press the power switch and select
the 3 in 1 washing cycle by pressing
the option button « Alt» until the
«3 in 1» indicator blinks.
2. The 3 in 1 washing cycle will be
available after pressing the start/
pause button , and the «3 in 1»
indicator lights.
To cancel «3 in 1» function:
To cancel 3in1 washing cycle by
pressing the function alternative button
or follow the «change the programme»
instructions.
If you decide to switch to the use of
a standard detergent system we advise
that you: