8
Technical passporT
english
dishwasher
Â
Switch the dishwasher on using the ON/
OFF button.
Â
Switch it off using the ON/OFF button.
Â
Press button P three times - a beep will be
heard.
Â
Switch it on using the ON/OFF button.
Â
The current selection level number and
rinse aid indicator light fl ash.
Â
Press button P to select the level of rinse
aid quantity to be supplied.
Â
Switch it off using the ON/OFF button
Setting is complete! If the rinse aid level is
set to ZERO (ECO), no rinse aid will be supplied.
The LOW RINSE AID indicator light will not
be lit if you run out of rinse aid. A maximum of
4 levels can be set according to the dishwasher
model. The factory setting is for a medium level.
Â
If you see bluish streaks on the dishes, set
a low number (1-2).
Â
If there are drops of water or limescale
marks on the dishes, set a high number (3-4)
DETERGENT
Only use detergent which has been
specifi cally designed for dishwashers.
DO NOT USE washing up liquid.
Using excessive detergent may result in
foam residues remaining in the machine after
the cycle has ended.
To achieve the best washing and drying
results, the combined use of detergent, rinse
aid liquid and refi ned salt is required.
We recommend using detergents that do
not contain phosphates or chlorine, as these
products are harmful to the environment.
FILLING THE DETERGENT DISPENSER
Good washing results also depend on
the correct amount of detergent being used.
Exceeding the stated amount does not result
in a more effective wash and increases
environmental pollution.
The amount can be adjusted to the soil
level. In the case of normally soiled items, use
approximately either 35g (powder detergent)
or 35ml (liquid detergent) and additional tea
spoon of detergent directly inside the tub. If
tablets are used, one tablet will be enough.
If the crockery is only lightly soiled or if it has
been rinsed with water before being placed in
the dishwasher, reduce the amount of detergent
used accordingly (minimum 25 g/ml) e.g. skip
the powder/gel putted inside the tub.
For good washing results also follow the
instructions shown on the detergent box.
For further questions please ask the
detergent producers.
To open the detergent dispenser use the
opening device A.
Introduce the detergent into the dry dispenser
B only.
Place the amount of detergent for pre-
washing directly inside the tub.
Â
When measuring out the detergent refer
to the (see PROGRAMS TABLE) to add the
proper quantity. Compartment B comprises a
level showing the maximum quantity of liquid
or powder detergent that can be added to each
cycle.
Â
Remove detergent residues from the
edges of the dispenser and close the cover until
it clicks.
Â
Close the lid of the detergent dispenser by
pulling it up until the closing device is secured
in place.
The detergent dispenser automatically opens
up at the right time according to the program.
If all-in-one detergents are used, we
recommend using the TABLET button, because
it adjusts the program so that the best washing
and drying results are always achieved.