Kuppersberg FV6TGRZ, Technical Passport

Page: 9 / 44

9
english Technical passporT
gas hob
6.3. ELECTRICAL CONNECTION
The electrical connections of the
appliance must be carried out in
compliance with the provisions and
standards in force.
Â
Before connecting the appliance,
check that the socket or system has an
ef cient earth connection in compliance
with the provisions and standards in
force. The manufacturer declines all
responsibility for failing to comply with
these provisions.When the appliance is
connected to the electricity main by a
socket:
Â
Fit a standard plug suited to the
load indicated on the data label to the
cable.
Â
Fit the wires following gure 4,
taking care of respecting the following
correspondences:
Letter L (live) = brown wire;
Letter N (neutral)=blue wire;
Earth symbol
= green - yellow
wire.
Â
The power supply cable must be
positioned so that no part of it is able to
reach an overtemperature of 65 °C.
Â
Never use reductions, adapters
of shunts for connection since these
could create false contacts and lead
to dangerous overheating. When the
appliance is connected straight to the
electricity main:
Â
Install an omnipolar circuit-
breaker between the appliance and the
electricity main. This circuit-breaker
should be sized according to the load
rating of the appliance and possess a
minimum 3 mm gap between its contacts.
FIG. 1
FIG. 3
FV6TGRZ
FV9TGRZ