Kuppersberg FV6TGRZ, Technical Passport

Page: 17 / 44

17
english Technical passporT
gas hob
FAULT POSSIBLE REASON SOLUTION
Electrical parts do not
work Fuse may have been
blown Check the fuse box in
home.
Gas does not appear
Valve may be off.
Gas in tube may ran out. Turn on the valves.
Change the gas tube.
Lighter does not work
Burner parts may be wet.
Burner cover may not be
tted correctly.
Ignition plug may be
stained.
Dry the burner parts.
Fit the burner cover
correctly.
Clean the ignition plug.
Flame does not spread
equally
Burner parts may be wet.
Burner cover may not be
tted correctly.
Burner lines may be
blocked.
Dry the burner parts.
Fit the burner cover
correctly.
Clean the burner lines.
Flame dies down at rst
ignition
The button may not be
pushed correctly.
Burner lines may be
blocked.
Hold down the button for
a few seconds after ames
appear.
Gas smell
There may be a gas leak
in the gas tube connector. Check the gas tube
connector.
9. TROUBLESHOOTING
Faults may be solved easily sometimes. Before calling the technical service, read
the following chart.