background image

6

TEchnical passporT

English

gas hob

This symbol indicates that the unit 

should not be disposed as domestic 
waste rather it should be returned 
to some electronic wastes collection 
center. The disposal of the product 
should be conducted as per the local 
environmental legislation. You may 
obtain detail information on disposal, 
reuse and recycling of the product.

 

Â

Keep the original packaging of 

the product. 

 

Â

Carry the product in its original 

packaging, and abide the markings 
thereon. 

 

Â

If the original packaging is not 

available; 

 

Take care for the impacts 

which may be applied on the outer 
surfaces of the product. 

 

Place/ hold the product in 

parallel to the ground during carrying 
(as the upper side will be up). 

 

Carry the pan holders not 

touching each other.

Packaging 

All packaging materials are 

recyclable. In order to contribute 
environmental protection place the 
packaging material wastes to the 
recycling bins.

Disposal of the old equipments 

The equipments being old and 

useless should not be thrown to a 
waste container directly. There may 
be some parts allowing re-use. Also 
there may be some environmentally 
dangerous materials requiring to be 
given to a collection center. Therefore 
you should take your unit to a collection 
center that you may learn from the 
manufacturer/ dealer in your city and 
insure that the electronic parts will be 
recycled. 

It is important to keep the user’s 

manual for it will be important in the 
event of change of the user of the 
device. 

Before disposal or scraping of the 

device it is required to prevent harmful 
and negative effects on human and 
environment. Otherwise it would be 
incompliant waste.

5. BEFORE USING YOUR 

APPLIANCE  FOR THE 
FIRST TIME 

 

Â

Make sure that you remove all 

packaging materials before using the 
unit. 

 

Â

When you remove the hob from 

the package make sure that hob and 
/ or the cable is full and undamaged, 
and no impact was put at the bottom 

Summary of Contents for FQ663

















Reviews: