Kuppersberg FQ 601, Technical Passport, Page: 13 / 48

13
ENGLISH TECHNICAL PASSPORT
Gas hob
This appliance is to be built into
a kitchen unit or 600 mm worktop,
providing the following minium
distances are allowed:
Â
The edges of the hob must be a
minimum distance of 60 mm from a side
or rear wall.
Â
700 mm between the highest
point of the hob surface (including
the burners) and the underside of any
horizontal surface directly above it.
Â
400 mm between the hob
surfaces, providing that the underside of
the horizontal surface is in line with the
outer edge of the hob. If the underside
of the horizontal surface is lower than
400 mm, then it must be at least 50 mm
away from the outer edges of the hob.
Â
50 mm clearance around the
appliance and between the hob surface
and any combustible materials.
POSITIONING