Kuppersberg 6136, Technical Passport

Page: 24 / 48

24
TECHNICAL PASSPORT ENGLISH
Cooker hood
socket and/or a hole for the passage of
the discharge tube).
Expansion wall plugs are provided
to secure the hood to most types of
walls/ ceilings. However, a qualified
technician must verify suitability of the
materials in accordance with the type of
wall/ceiling. The wall/ceiling must be
strong enough to take the weight of the
hood. Do not tile, grout or silicone this
appliance to the wall. Surface mounting
only.
*contingent on the model
OPERATION
Use the high suction speed in cas-
es of concentrated kitchen vapours. lt
is recommended that the cooker hood
suction is switched оn for 5 minutes
prior to cooking and to leave in opera-
tion during cooking and for another 15
minutes approximately after terminat-
ing cooking.
The hood operation is controlled by a
combined switch.
Buttons “-” and “+” - are used to adjust the
fan speed from 1 to 4.
1. Button “-” - pressing decreases the fan
speed.
2. Button “+” - pressing increases the fan
speed.
3. Display
4. Clock button ( ) - allows you to program
the time turn off the fan.
5. Light button - switches the hood light
on and off, regardless of the fan operation.
This regulation contributes to the selec-
tion of the optimal fan speed with mini-
mal noise.
Program function (cooker hood swi-
tchoff time programming button) ;
Timer: you саn program the hood
fan to switch off automatically at any
time you choose between 10 and 90
minutes at 10-minute intervals.
- То еnаblе this programming func-
tion, press the “+” button to switch the
hood fan to the chosen mode, and then
press the fan switch-off time program-
ming button.
- А blinking “0” will арреаг оп the
panel to indicate that the time pro-
gramming has started.
- Enter the automatic fan switch-off
time using the “+” button, taking into ac-
count that the number indicated оп the
panel multiplied Ьу the 10-minute time
interval corresponds to the time of the
hood fan’s Late switch-off (for example,
the number 1 = 10 minutes, the number
2 = 20 minutes, the number 3 = 30 min-
utes, etc.)
- After selecting the required Late
switchoff time interval, you must con-
firm your choice Ьу pressing the hood
switch-off time programming button
again, the panel will stop flashing and
show the previously selected mode,
and the flashing point in the mode will
count down the remaining time un-
til the hood fan is turned off. You сап
disaЫe the automatic fan switch-off
function Ьу pressing the hood switch-
off timer button during the countdown
of the remaining time.