Hint:
Don´t fill up holes by glue. Just smear (dive) dowels and
insert them into the holes
WARNING: Wooden parts may be sharp.
Hint:
Before assembly of tool shelf, decide, if you want to have
deeper or shallower shelf.
Grooves down = deep shelf
Grooves up = shallow shelf
Before screwing of vice jaws (8), be sure that jaws are parallel
with bench top (1).
Hint:
Tighten jaws using spindles. Align jaws with bench top
and then use bolts 6x40mm (14) for attaching jaws to spindles.
Friedrich Küpper GmbH, Friedrich-Küpper-Weg, 54570 Berlingen, Germany, http://www.friedrich-kuepper.de
