background image

11

KUNBUS GmbH

KUNBUS Ethernet Test Access Point TAP-2100

The TAP 2100 can also be used without a plugin or another Ethernet analysis program. 
However, the 20 byte supplemental information attached by TAP 2100 to the Ethernet 
package cannot be decoded. Furthermore, it may happen that a packet is displayed as 
faulty, although it just cannot be fully decoded because of the suppl

3.2 

Operation with Wireshark

3.2.1 Wireshark principles

Wireshark is a free and very popular analysis program for network communication 
connections, and was previously known as Ethereal. The designation Wireshark is 
composed of the words wire and shark. Wireshark is a so-called Network Sniffer, or a 
Network stumbler software. 

The tool, known also as data logger software, provides the opportunity to map the 
data traf

fi

 c of an interface (generally Ethernet TCP/IP) after or while capturing a data 

packet. A clear, simpli

fi

 ed data analysis is provided that can easily be understood from 

the user side. This way there is an opportunity to examine individually captured data 
packets, or to sort by speci

fi

 c contents. In addition to extracting for example images 

(binary content), Wireshark can also process and prepare clear data 

fl

 ow  statistics. 

WinPcap allows transparent recording from the respective data traf

fi

 c under Microsoft 

Windows.  Wireshark works on almost all platforms:

• Windows 

•  Mac OS X 

• AIX 

• BSD 

• Linux 

• Solaris

Merely a network card and TAP 2100 are necessary to use Wireshark.

3.2.2 Wireshark installation

As mentioned above, Wireshark can be used on nearly all current systems. However, at 
the moment a plugin is only offered for Windows to display the TAP-2100 supplemental 
information. For further questions, please contact our sales department.

If Wireshark is already installed, the Wireshark plugin DLL will only need to be 
downloaded from the KUNBUS website and copied to the Wireshark plugin directory, 
e.g. C:\Programs\Wireshark\plugin\1.10.2. Use 

fi

 le tap32_1.10.2.dll or tap64_1.10.2.dll, 

depending on use of the 32 or the 64 bit Wireshark version.

Summary of Contents for TAP-2100

















Reviews: