Kunbus PROFINET IRT Slave, User Manual

Page: 6 / 40

Gateway PROFINET IRT Slave 6
2.4 Important safety instructions
DANGER
Danger of explosion
The modular Gateway component do not meet the requirements of the ATEX directive. Therefore,
they are not suitable for use in potentially explosive environments.
a) Do not use the modular Gateway component in potentially explosive environments.
CAUTION
Electric shock
Switch off all voltages before assembly/disassembly.
a) Failure to observe this warning may result in personal injury.
CAUTION
The devices are „open equipment“ according to the Standard UL61010-2-201.
To fulfill requirements for safe operation with regard to mechanical stability, flame retardation, sta-
bility, and protection against contact, the following alternative types of installation are specified:
a) Installation in a suitable cabinet.
b) Installation in a suitable enclosure.
c) Installation in a suitable equipped, enclosed control room.
NOTICE
Incorrect connection of the power supply
Using an unsuitable power supply can destroy your modules and connected devices.
a) Use a power supply in the approved area for the base modules. The values for this can be
found in the technical data of your base module.
2.5 Environmental Conditions
Operate the device only in an environment that corresponds to the operating conditions in order to
prevent damage.
Suitable environmental conditions are:
Operating temperature -20 °C up to +55 °C
Humidity 93% (non-condensing)
NOTICE
This device is designed for indoor use only.
If you use the device outdoors, it may be destroyed.
a) Use the device indoors only.
Safe Use