Kunbus PROFINET IRT Slave, User Manual

Page: 12 / 40

Gateway PROFINET IRT Slave 12
3.3 Status LEDs
The signals of the status LEDs for PROFINET have the following meaning:
LED designation Signal Meaning
Power off The gateway component is not in operation
flashes, green Initialization phase not yet completed
on, green Operational
flashes, red Correctable error (e.g. second gateway component
missing)
on, red Serious error/defect in the gateway component
Link/Traffic Port 1 off No connection to a network
on, green Network cable is plugged in
flashes, green Data packets sent or received
Link/Traffic Port 2 off No connection to a network
on, green Network cable is plugged in
flashes, green Data packets sent or received
Run off No connection to a network
on, green PROFINET controller is in operating state
1 flash, green PROFINET controller connected, but no data pro-
cessing takes place
flashes 1 Hz, green Signaling. Triggered by tool to identify the gateway
component
Diagnosis off Everything OK
on, red Gateway component reports diagnostic data
flashes 2 Hz, red No connection to the controller
No PROFINET name set in the gateway component
flashes 1 Hz, green Signaling. Triggered by tool to identify the gateway
component
Overview