Installation Instruction DF PROFINET IO
cPCI
5 / 7
3 Installation on the Board
The DF PROFINET IO CPCI is a Plug&Play-compatible board. The configuration
entirely takes place by means of the delivered software or the BIOS of your PC
respectively. Thus, no jumpers or DIP-switch adjustments are necessary.
To mount the board, please proceed as follows:
◦ Please see also the operating instructions of your PC.
◦ Switch off the Compact PCI System and interrupt the power supply
◦ Select a free CPCI slot.
◦ Plug the DF board into the determined slot
◦ Screw down the board.
NOTICE
When mounting, please follow the safety instructions for
electronic modules against electrostatic charge.
The DF PROFINET IO CPCI does not support Hot Plugging. If in-stalling/
uninstalling the board the Compact PCI system must be switched off and the
power supply must be interrupted.
Illustration 1:
DF PROFINET IO CPCI – Board
1
LAN socket for controller functionality
2
LAN socket for device functionality
Installation on the Board
