Kumpan electric 1950 Pure, User Manual

Page: 50 / 62

Set the vehicle on the main stand
(1950 Pure & 1950 Urban)
: Stopping / parking (
(1950 Pure & 1950 Urban)
:
MAIN STAND:
Position yourself on the left side of
the kickboard.
Hold the kickboard on both handles
Press the main stand with your foot,
on the flap extension downwards un-
til it hits the ground.
Take the gas away and slowly decele-
rate the vehicle.
In the case of the kickboard version
with Urban approval, switch off the
throttle mode
(see page 42) .
Lay the vehicle on steady and leveled
pavement if possible, in order for the
vehicle not to fall over.
Lay the vehicle on the support stand.
(see the following description) .
Advice:
Pay attention that after a longer use
of the hydraulic brake disc, it can get
very hot. Do not touch the brakes im-
mediately after using.
Hold the kickboard from the handle
up and in the same time slant it rear-
ward.
Look the support stand in its end-
position, by slanting the kickboard
toward the front.
Operation/Driving