KUMATSUGEN GM1200 Owner'S Manual Download Page 9

9

 

www.BormannTools.com 

GB 

Introduction 

The motors are sold without batteries; please choose battery with 12V (24V for 86LBS motor) 

output 

to fit this motor,

the red wire 

is for connecting to anode, the black wire is for connecting to cathode.

Please fix all parts following the instruction.

Th

e motor can only be used in water deeper than 0.8m.

Warning information 

This is not a life saving device.

Do not leave children unattended while device is in use.

The user must dressed with lifesaving 

coat.

Please read the user's manual carefully

.

Never put the control box in water, if it fell into water completely, you must send it to professional people to clean it

before use.

Never unfix any part of this motor.

Only use this products between -

20

 to +45

 

(-4

 

to 113

).

Never replace any parts 

with the parts from other supplier.

Ensure sufficient battery charge remaining, when there is only 3 lights is bright on the voltage meter, the motor must

be unconnected with the batteries immediately, 

to prolong the life of the batteries

, after 120 minutes continuous

working with high speed, please leave the battery have rest for 10 minutes.

To prevent accidental damage of fiber glass composite shaft

,

 don't tense mounting bracket small screw too tight

.

Never stick body parts, clothing or other objects in the vicinity of the propeller. Do not wear loose or flowing clothing or

equipment that could be drawn into the propeller.

Particular attentions should be paid when using this item near anybody with long hair. Users with long hair should

 tie

it up or wear swimming caps when using the boat.

Always inspect the swimming area to ensure it is free of hazards or danger

 

such as boats and swimmers before using the

motor.

Always wear a coast guard approved personal flotation device when using th

e boat with this motor.

A child under 16 years old or end

-user 

cannot

 swim should NEVER operate the boat 

independently

A child under 14

years old should NEVER operate this product.

Never use when the wave is over 1m high.

Never unfix the product in water or when it is wet.

Never put the upper part with handle in water, if it got wet, the user must disconnect the battery and try to clean and

dry it.

Keep lead wire connection tight and solid to battery terminals.

Use 

6

-

gauge

 

wire to extend power lead.

L

ocate battery in a ventilated

 

compartment.

Technical Data

Voltage: 12V

engine power: 480 w

Gears: 5 Forward And 3 Reverse Gears

Summary of Contents for GM1200














Reviews: