12
www.BormannTools.com
III.
Connect with battery:
a. Connect the anode
(+) red lead to the anode (+) battery terminal.
b. Connect the cathode (
-
) black lead to the cathode (
-
) battery terminal.
c. Ensure the battery is fully charged before use,
they
must be able to endure working current.
80AH deep cycle gel battery is suggested.
IV.
Control the direction:
Turn the handle in the illustrated to control the direction of your boat:
V.
Read the 10 LED
s
voltage meter to avoid damaging the battery
VI.
There are 10 LEDs on the meter, 7 upper LEDs are green and 3 lower LEDs are
red, when all the green LEDs are turned off, that means the input voltage is
lower than 9.5V, you must turn off the motor and disconnect the motor from
the battery, otherwise it may cause forever damage to the battery.
