Selecting the pre-set number ( for example, the pre-set number ① and 600Nm )
① Press the power switch. The display shows [ 0 ] blinking.
② Press ① for a few seconds. The pre-set ① is set 600 Nm.
When the display indicates ① [ P.1 ], release the key.
Soon after indicating [ P.1 ], the display also indicate
the torque value [ 600 ] Nm.
At this moment, the pre-set key ① is selected.
Selected pre-set key is valid until changing to other pre-set key.
③ Check the rotative direction ( Reverse Lever ).
R : Right Rotation
L : Left Rotation
(Fastening the right
(Fastening the
handed screw)
left handed screw
for [Aut] mode)
④ After placing the reaction force absorber next to the fastening bolt/nut, insert the socket to the fastening
bolt/nut and press the throttle lever.
( Caution )
・ In case of right handed screw, the reaction force absorber
rotates to the direction (A).
・ In case of left handed screw, direction (B)
How to operate the lock lever (example)
Turn the handle to the direction
The handle and the reactive force
of A while pressing the lock
absorber move synchronously.
lever. Then release the lock
Turn the handle and the reactive force
lever and turn the handle to
absorber to the workable direction with
the direction B.
the lock lever.
The reactive force absorber
rotates to the direction C.
How to Fasten
Industrial Mode [Ind]
In case of fastening the
left handed screw.
( [Aut] mode only )
In case of fastening
the right handed
screw
Reaction Force Absorber
Blinking
Reverse
Lever
Lock Lever
