20
|
EN
Setting of welding parameters
Setting the welding method
The selection and confirmation of the welding method is carried out using the
control button.
MMA
- a method designed for welding with a coated electrode CrNi, Al, alloys
and steel materials
TIG HF
- The method is designed for welding of CrNi and steel materials with
DC current and Al materials with AC current. It also allows soldering.
TIG LIFT
- The method is designed for welding of CrNi and steel materials with
DC current and Al materials with AC current. It also allows soldering.
Method switching button
MMA method
Method switching button
TIG HF method
TIG DC
TIG AC triangle
wave
TIG AC square
wave
TIG AC sinusoid
wave
Method switching button
TIG LIFT method
TIG DC
TIG AC triangle
wave
TIG AC square
wave
TIG AC sinusoid
wave
MMA
- Welding current setting
The welding current is set using the control n-encoder. The „welding current
setting“ function must be active for the setting. Activation is done by pressing
the control n-encoder one after the other.
Main current indicator Welding current setting
MMA method
N-coder
Welding current
MMA
- Setting the HOT START function
(easier ignition)
The function allows setting the value of the welding current increase when
the arc is ignited. The function facilitates ignition of the welding arc. The
function is set in the range 0 - 100, which sets its intensity: 0 = off; 100 =
maximum. Activation is done by pressing the control n-coder one after the
other.
HOT START
MMA method
N-coder
MMA
- Setting the ARC FORCE function
The function increases the energy supplied to the shortening arc by the
MMA method, thereby accelerating the electrode melting and preventing
it from sticking. The function is activated when the arc voltage drops below
approx. 17 V. Setting the value determines the possible increase in welding
current. The function is set in the range 0 - 100, which adjusts its intensity.
0 = off; 100 = maximum. Activation is done by pressing the control n-coder
one after the other.
ARC FORCE
MMA method
N-coder
