| 35
Setting the SOFT START TIME function
(duration)
The function allows you to set the flow time for the wel
-
ding current.
Setting up HOT START
(easier ignition)
The function allows setting the welding current in
-
crement value when the welding arc is ignited. The
function facilitates the ignition of the welding arc. The
required duration must be set to the correct operation.
If the duration is 0, the function is inactive.
Setting the SOFT START TIME function
(duration)
The function allows you to set the flow time for the wel
-
ding current.
Activate / deactivate the function
HOT START - Analogue RS
The function is automatically active in the MMA method.
Switching to the TIG method will deactivate the function.
By switching between methods, this feature is turned off
and on. The coated electrode can also be operated in TIG
mode.
Function is activated
PRESS
Function is deactivated
PRESS
Setting ARC FORCE function
(arc stability)
The function increases the energy supplied to the shor
-
tening arc with the MMA method, thereby accelerating
the electrode to prevent it from sticking. The function
is activated if the arc voltage drops below approx. 17 V.
By setting the value, a possible increase in the welding
current is determined. Press the SET button for about 3
seconds until the display shows fits the AF symbol. There
are three options to choose from:
AF 0
function is off
AF 1
set to 50% AF
AF 2
set to 100% AF
EN
