Operating Instruction
Start/Stop control unit for drive motors
KEA 293 PST
File:
BA_KEA 293 PST_EN_Ver 2016-07-01.doc
(replacing 2014-10-02)
Art.-Nr. 2A293P5000
1
Alfred Kuhse GmbH
Telefon: +49 4171-798-0
E-mail: [email protected]
Subject to technical changes
An der Kleinbahn 39,21423 Winsen
Telefax; +49 4171-798-117
http://www.kuhse.de
______________________________________________________________________________________
1.
General description
The
KEA 293 PST
automatic system is used for the
control and monitoring of standalone systems
.
Both
Diesel and gas motors
can be controlled.
All controls, displays and the
mimic diagram
are arranged in a clear manner. Menu-driven guidance has
been omitted in order to keep the handling simple and the system user-friendly.
The automatic system includes
all functions for automatic operation and manual operation
. All functions
allocated to the genset are included for
sprinkler operation
.
Ten displays
can be selected as alarms or operational indicators. Provision has been made for remote
acknowledgement of alarms.
The speed
is measured via a pick-up frequency and can be monitored for overspeed.
The battery voltage monitor
and a start counter and an operating hours counter
are integrated.
Ten freely selectable alarm messages are provided for the monitoring of the peripherals and the genset.
There are 10 relay outputs available for
controlling the motor and the peripherals
, switching power 35 V
DC, 1 A. The function of the 7 relays and all of the parameters can be set via a USB interface. The
P
ARA
W
IN
software is required for this.
All relevant values and signals can be read out via an
add-on module.
The device is delivered with standard parameterisation and labelling.
The operation of the automatic system is simple and straightforward, as it is carried out directly
via the usual buttons, without menu navigation, as with the replacement automatic system.
