System Description
KUHNKE Automation
26
6.2.1.2 CODESYS Program Communication Parameter Setup
Use the 'Communication Parameters' dialog you access from the 'Online'
menu to select and configure the communication channel.
•
Pick 'Online' from the menu to display the 'Communication Parameters'
dialog.
•
Press New.
A dialog called 'Communication Parameters: New Channel' is displayed.
The box next to "Name" defaults to the name of the channel you entered
last. The name in the box can be edited. Channel names are for your in-
formation only. Whereas you are not obliged to assign unique names, you
are still advised to do so.
Check the table under 'Device' to find the device drivers registered with the
gateway computer. The contents of this list depends on your personal con-
figuration and the device drivers it includes.
•
To define an Ethernet link to Ventura Scout, pick "Tcp/Ip (Level 2 Rou-
te)" from the list.
•
Enter Ventura Touch's IP address as the "
Address
". The address is
shown on the 'IP Config' Service Menu page.
•
Disable the "
Motorola byte order
" by setting the option to "
No
"
Example of Ethernet communication parameter setup
