KUHNKE Automation
System Description
25
Following successful installation, "KUHNKE PC Control Ventura" appears
in column "Installed target systems. The programming system can now ac-
cess the Ventura controller.
6.2 CODESYS Programming PC Setup
6.2.1 Ethernet Connections of Ventura IPC
•
To directly connect the IPC with the programming PC, please use a
CAT5 crossover cable.
•
To operate Ventura Scout in a network, please use a CAT5 patch cable.
•
CODESYS communication should go through Ventura Scout's X2 port.
6.2.1.1 Programming PC's Ethernet Interface Setup
Network connection
No settings should have to be made or changed to program the IPC via a
network.
Windows XP, direct connection
•
Go to Windows Start and choose
Start – Settings – Network Connections: pick "LAN connection" from list,
then "Properties".
•
Go to tab "General", find the list of elements, choose "Internet protocol
(TCP/IP)" and click on Properties.
•
Still on tab "General" choose "Use this IP address" and enter any IP
address as appropriate,
e.g.: "172.25.224.10", subnet mask "255.255.255.0"
A direct connection requires the "File and printer release" to be ticked and a
firewall, if any, to be disabled at least for the time of this connection.
