50
Cleaning and caring
Cleaning and caring
Safety
For all cleaning and caring activities applies:
Do not penetrate bearings and hydraulic parts
Be careful when cleaning with a high-pressure cleaner. Bearings,
sealings and bolted joints are not waterproof. To avoid machine
damages never penetrate bearings, sealings and bolted joints with
water.
Do not clean bearings, electronic and hydraulic parts with high
pressure
Do not clean bearings, electronic and hydraulic parts with a high-
pressure cleaner. Bright metal parts will get degreased and start
rusting. After every cleaning grease the bearings and grease bright
metal parts.
Cleaning
After every time of using the machine:
> clean the machine of all accumulated crop
Cleaning can be done with the high-pressure cleaner. Do not clean
bearings, electronic and hydraulic parts while cleaning with the high-
pressure cleaner.
After cleaning
After cleaning with the high-pressure cleaner
> grease all bearings
> clean the space between drums and skid discs
Caring
When you observe the rules below, you will have a fully operational
machine at the start of the next season:
> Protect all bright metal parts with an oil film. Only use authorized
biological oil, like rape oil
> Repaint any paint damages
