Main operations
Press on notch using a screwdriver to close the snap
ring.
Position a small screwdriver behind the snap ring to stop
it from taking up its initial position.
Position small screwdriver at 90 degrees with
regardsto the first screwdriver.
Step 4.
Remove larger screwdriver. Press small screwdriver until
snap ring is opened. Pivot screwdriver to free snap ring
from its housing.
Remove lock pliers and snap ring.
Step 1.
Replace bearing in the cutterbar
Page 48/95
Printing date : 06-02-2014
GMD44_760001_xxxxxx
©Copyright KUHN S.A.
