10. - Maintenance and storage
GMD 3150/3550/4050 TL CE
47
7N136AGB-A
Disk mower
10.3 Lubrication
Except for the secondary PTO shaft lubrication, the
machine must be placed in transport position for all
maintenance operations (knife replacement,
lubrication, etc).
Clean grease nipples before greasing.
10.3.1 PTO shaft
Primary PTO shaft
- Every 50 hours:
• universal joints (1).
• transmission tube (2).
Secondary PTO shaft
- Every 50 hours:
• universal joints (1).
- Every 50 hours:
• transmission tube (2).
• constant velocity joint (3).
Clean and grease the implement input driveline
before each prolonged period of use.
Before adjusting, maintaining or repairing
the machine, perform the safety shutdown
procedure.
Lubricate with multi-purpose grease grade NLGI
2 or equivalent.
Rotating guard bushings should be lubricated
upon replacement.
Grease the constant velocity joint when the shaft
is straight.
The PTO shield requires extra grease to
prevent freezing.
1
1
2
2
1
1
3
Summary of Contents for GMD 3150 TL CE
Page 2: ......
