KUHN FC883RA, Operator'S Manual, Page: 77 / 104

Maintenance and storage
Mower conditioner
FC883RA
75
PTO shaft
Primary PTO shaft
- Every 250 hours:
• universal joints (1).
- Every 40 hours:
• transmission tube (2).
• guide rings (3).
Secondary PTO shaft
- Every 250 hours:
• universal joints (1).
- Every 40 hours:
• transmission tube (2).
• guide rings (3).
The grease zerks of the secondary PTO shaft U-joints
and guiding bushes are accessible by unlocking the 2
clips of the 2 guard cones (1).
The profiled tubes are lubricated by grease zerk (3):
- Slide the black collar (2).
- If necessary, rotate a disc to access the grease zerk.
- Slide the black collar back in place when lubrication
has been completed.
Place the machine in working position.
Stop the tractor engine and remove ignition
key.
Follow same procedure on the other secondary
pto transmission shaft.