KUHN FC883RA, Operator'S Manual, Page: 69 / 104

Instructions for work
Mower conditioner
FC883RA
67
Lateral offset
During work, the machine frame can be offset laterally to
avoid strips of uncut crop when turning or on slopes.
When turning:
When turning at work, the overlap between the mowing
units can be insufficient.
To adjust the overlap:
- Offset frame using the double acting hydraulic valve.
- Position the central frame in line with the tractor when
coming out of the curb.
The frame must be offset towards the outer curb
side.
The offset increases the overlap up to
D = 270 mm (10’6’’).