FC2860-3160-3560 TLR/TLS
58
8. - Instructions for work
KN282CGB_A
Mower conditioner
8.2.1 Cutting height
- Place the machine on flat ground.
Adjustment must be made with the machine
coupled, hitch pins at 650 mm (26’’) from the
ground.
Cutting height is always adjusted before
adjusting the ground pressure.
The adjustment is centralized by means of the pitch
angle rod (1).
The height can be adjusted between 25 and 85 mm
(1"/3.3") (Equipment excluded):
• Mark 1 = 25 mm (1’’).
• Mark 5 = 85 mm (3.3’’).
To adjust the cutting height:
- Lift lock (2).
- Turn clockwise to reduce cutting height (a).
- Turn counter-clockwise to increase the cutting
height (b).
- Lower lock (2).
1
2
a
b
Summary of Contents for FC2860 TLR
Page 2: ......
