KUHN EL 92, Assembly & Operators Manual

Page: 24 / 46

- 22 -
2. WHEELS (photos 21 and 22)
Kit no. 120 6670
The “wheel” equipment includes : - 1 left wheel (R) with handle (T),
- 1 right wheel (R) with handle (T),
- 2 wheel support (S) and mounting hardware (H),
- 2 lock pins (P),
- 2 hexagonal screws (W) (M10 x 25),
- 2 self-locking nuts (M10).
To fit the wheel equipment on the machine (photo 21), proceed as follows :
- Mount wheel supports (S) on front cross tube (L) on either sides of the frame using 2 hexagonal screws (H)
(M12 x 100) and 2 self-locking nuts (M12) (torque : 8.5 daNm/ 63 ft.lbs) (photo 22). These supports (S) may
be positioned either to the front or to the rear of cross tube (L).
- Fit wheels (R) in supports (S) and lock them using pins (P) (photo 22).
The wheels are adjustable :
- in height inside their supports (S) using pins (P) (photo 22)
- sideways by sliding supports (S) on front cross tube (L) (photo 22), thus enabling to adapt the machine to the
tractor’s wheel track.
Adjusting the wheels (R) is facilitated using the operating handles (T) which are installed with hexagon screws (W)
(M10 x 25) and self-locking nuts (M10) (torque to 4.9 daNm / 36ft.lbs) (photo 22).
21
22