10
7.2.
Lamp replace
Attention! When replace the lamp is forbidden to touch lamp with bare hand, to
avoid the greasy dirt stains filament. filament must be kept clean. Disconnect the
power. Before replace lamp, fixture need 20 minutes for lamp cooling. Fasten the
head with Y axis protect lock in 60 ° position.
1.
Use cross screwdriver to open the light body cover
2.
After open the cover, you can see the lamp inside, please wait the lamp be cool after used
but not touch it in hot status.
3.
One hand press the lamp holder, another hand hold the lamp and pull out the wires
4.
after take apart the lamp, please check the inside glasses, clear it will make the light
better effect
