5
Issue 01 JAN.20
Step 15 - Fit the Door Glass
2.
Carefully
lift the door into position.
3. Carefully position both sets of wheels assemblies into the
running groove in the top rail.
1. At the top of both wall posts
secure and fit the Top Caps (M224-
01) with the No.4x13mm CSK
screws provided. Like shown.
Step 16 - Add the Bottom Guides to Door
1. Disassemble both DCM210-ASM guides. Slide the guides along the rail so
that they match up with the holes on the ‘hanging’ Door Glass.
Step 17x - Fit Cover Caps
2. Re-insert the removed pads and screws. Use both hands. One to hold the guide
and pads in position and the other to re-insert the screw. Ensure the guides are
fitted tightly against the bottom edge of the curved sliding door.
Note: To allow smooth operation of the cast sprung guides, apply Vaseline or
appropriate lubricant to inside of the
bottom rail only
.
1. Before fitting the door make sure the top rail is free from debris. Use a
lint free cloth to wipe the inside of the rail.
Inside view
Inside view
Inside view
