8
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: TK-1818R2A PRODUCT CODE:47365 10/2014
Getting Started
Before first use
• Unpack the appliance
but keep all packaging materials until you have made
sure your new espresso machine is undamaged and in good working order.
Plastic wrapping can be a suffocation hazard for babies and young children,
so ensure all packaging materials are out of their reach.
• Inspect
the cord and plug
for damage or wear before each use. Do not
use the appliance if the appliance or its cord have been damaged or are not
working properly. In case of damage, contact the after sales support line.
• Read
all instructions
in this manual and make sure you understand all
warnings. Refer to the Product Overview on page 5 to familiarise yourself with
the product and identify all parts.
• Remove and wash
the water container (see page 11), porta filter and filters,
drip tray and drainer, and the measuring spoon in warm water and a little
mild detergent to remove any dust from transport. Rinse and dry each part
thoroughly, then refit the drip tray and drainer. Wipe the steam wand clean.
• Flush the internal brewing system
as follows:
1. Fill water into the container (see page 11 for details).
2. Put a filter into the porta filter – without any ground coffee at this stage –
and engage it onto the brew head (see page 10 for details).
3. Place a larger container underneath the outlet openings.
4. Plug the machine into a wall outlet and set the hot water/steam selector to
the HOT WATER position (button released).
5. Press the ON/OFF button to turn the appliance on, and set the function dial
to the
position. As soon as the HEATING light goes out, hot water will
start flowing from the outlets.
6. While watching the container so it does not overflow, leave the pump
running until about half the water has passed through. Then turn the
function dial to the neutral position to switch off the pump.
7. Empty the hot water out of the container and place it under the steam wand
8. Turn the function dial to the
position.
CAUTION:
Take care, as soon
as the heating light goes out, steaming hot water will start flowing from the
steam wand, and there may be some splattering!
9. While watching the container, let the water pass through until the amount
left in the container has reached the MIN mark.
10. Then turn the function dial to the neutral position to switch off the pump.
• Follow this same procedure
if the appliance has not been used for a week,
or for a longer period of time.
