16
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: JT-2013B PRODUCT CODE: 50904 09/2015
Other Useful Information
Cleaning and Care
Fig. 9
CAUTION!
• Always switch off and unplug the appliance before cleaning and maintenance.
• Never immerse the motor base in water or other liquid for cleaning.
• Do not use abrasive cleaning agents, scouring pads, acetone or alcohol-
based cleaners as they will affect the plastic and steel surfaces.
To ensure your slow juicer remains in good working condition and continues
to produce great tasting juice, it is important that you clean all parts of the
appliance as soon as possible after each use. Allowing juice residues and pulp to
dry onto surfaces will make cleaning more difficult and time-consuming.
• Make sure the unit is switched off and disconnected from the power outlet.
• Turn the lid anticlockwise to unlock, then take it off the bowl.
• Lift the auger out of the strainer, you may have to turn it slightly if removing it
is difficult. If you still cannot move the auger, replace the lid and plug the unit
back in. Operate the unit in reverse for about 3 seconds, then unplug again
and restart the disassembly steps.
• Lift the strainer and rotating basket out of the bowl, you may have to rotate it
slightly.
• Grip the bowl with both hands and gently pull it off the motor base.
• Rinse and wash the parts thoroughly in warm, soapy water, using the supplied
cleaning brush. Rinse once more and leave to air dry.
• To remove pulp from the chute, use the little
hook on the cleaning brush. Open the orange
silicone pad on the underside of the bowl
(Fig. 9) and flush through with water.
• Wipe the motor base housing with a damp
cloth only.
• Make sure all components are dry before
reassembly.
Safety Feature
The slow juicer is equipped with an overload protection, which switches off the
motor if the appliance is overloaded. In such a case, switch off and unplug the
appliance and let it rest for about 10–20 minutes before restarting it.
