OPERATING THE ENGINE
14
A
Use of a higher voltage source on a machine could
result in severe damage to the machine electrical
system.
Use only matching voltage source when "jump-
starting" a low or dead battery condition.
STOPPING THE ENGINE
1. After slowing the engine to half speed, turn the key
switch to the "OFF" position.
2. Remove the key.
3. Do not leave the key switch "ON" (key in the "ON"
position) as the battery will discharge when the engine
is not running.
4. Apply the parking brake.
5. Turn the carburetor fuel valve to "STOP" (OFF)
position.
A
Do not stop the engine when the machine is on an
incline for a long time. The engine oil may go into the
carburetor and the muffler through the valve system.
A
Place the throttle control lever in the half speed
position to help prevent the engine from backfiring
before stopping the engine.
(1) Carburetor fuel valve
(A) "STOP" (OFF)
(B) "RUN"
