38
MAINTENANCE
LUBRICANTS
Note
* Oil amount when the oil level is at the upper level of the oil level gauge.
A
To prevent serious damage to hydraulic systems, use only KUBOTA genuine fluid or its equivalent.
Place
Capacities
Lubricants
ZD321 [N]
ZD326P [S]
ZD331P [LP]
Fuel
49 L (12.9 U.S. gals.)
No.2-D diesel fuel
No.1-D diesel fuel if temperature is below
-10
(14
)
Coolant
2.7 L (2.85
U.S.qts.)
3.5 L (3.70 U.S.qts.)
Fresh clean water with anti-freeze
Recovery tank
0.25 L (0.26 U.S.qts.)
Engine crankcase
3.5 L (3.70
U.S.qts.)*
3.9 L (4.1
U.S.qts.)*
5.7 L (6.0
U.S.qts.)*
Engine oil: API service
Classification CF or better
Above 25
...SAE30, SAE10W-30 or 15W-40
(77
)
0 to 25
.........SAE20, SAE10W-30 or 15W-40
(32 to 77
)
Below 0
........SAE10W, SAE10W-30 or 15W-40
(32
)
Transmission case
with filter & hose
Rear axle gear case
(RH &LH)
12.1 L (12.8 U.S.qts.)
KUBOTA UDT or SUPER UDT fluid*1
Mower gear box
0.4 L (0.4 U.S.qts.)
SAE90 gear oil
(API service classification: more than GL-3)
Greasing
No. of greasing points
Capacity
Type of grease
Motion control lever
pivot bushing, and
contact position
6
Until grease
overflows
Multipurpose Grease
NLGI-2 OR
NLGI-1 (GC-LB).
King Pin
2
Center Pin
1
Front wheel
2
Front lift arm
2
Universal joint
3
Seat adjuster
2
Cable (throttle)
2
Moderate amount
Oil
[MOWER]
Until grease
overflows
Multipurpose Grease
NLGI-2 OR
NLGI-1 (GC-LB).
Universal joint
3
Three spindle shafts
3
Belt tension pulley
1
Belt tension pivot
1
Front anti scalp roller
2
Front anti scalp roller
pivot boss
2
