18
18.Clamp the fuel tube (1) to the stay (2).
19.Clamp the fuel tube (2) by the cord band on the fuel
tube (1).
A
Cut the cord band leaving 5 to 10 mm.
20.Install the fuel pipe, the fuel hose, and the fuel cap by
the steps reverse from B)-15 to B)-16.
A
Use the new parts below for the pipe and the hose.
(1) HOSE (FUEL) (V0511-5118 )
(2) PIPE (FUEL) (V0511-5117 )
21.Lower down the cab and make the maschine to the
first state by the steps reverse from A)-1 to A)-5.
22. Replace the label.
23. Start the engine, then check there is no fuel leak.
A
See "PURGING OF THE FUEL SYSTEM" in "OTHER
CHECKS AND REPLACEMENTS" section in the
Operator's Manual.
(1) Fuel tube (fuel filter - supply pump)
(2) Stay
(1) Fuel tube (fuel filter - supply pump)
(2) Fuel tube (fuel filter - return)
(A) 5 to 10 mm
Tightening torque
Bolt
48 to 55 N-m
4.8 to 5.7 kgf-m
36 to 41 ft-lbs
(1) LABEL (MAINTENANCE) (V0521-5756 ) (English)
or
LABEL (MAINTENANCE, FR) (V0521-5956 ) (French)
Summary of Contents for V0621-9860
Page 2: ...2 ...
