Kubota U48-4, Workshop Manual

Page: 27 / 41

GENERAL
U48-4,U55-4, WSM
G-11
• The plastic covers of connectors must cover them completely.
RY9212001GEG0037US0
[4] WASHING THE EXCAVATOR WITH A HIGH-PRESSURE
WASHER
Using a high-pressure washer incorrectly can lead to personal
injury and/or damage, break or cause parts of the mini-excavator to
fail, so use the power washer properly according to its user's
manual and labels.
CAUTION
• Stand at least 2 meters from the mini-excavator and adjust
the nozzle for a wide spray so it does not cause any
damage. If you blast the mini-excavator with water or wash
it from too close a distance,
1. It may cause a fire due to damaged or cuts in the insulation
of electrical wiring.
2. An injury may result if hydraulic oil gushes out under high
pressure, due to damaged hydraulic hoses.
3. It may damage, break or cause parts of the mini-excavator
to fail.
(Ex.)
(1) Stickers or labels may come off
(2) Electrical parts or the engine may fail due to water in them.
(3) Damage glass, resins, etc. or the rubber of oil seals.
(4) Tear off paint or the film from plating
RY9212001GEG0038US0
(1) Cover
(A) Correct
(B) Incorrect
(1) Do not blast with water
(2) Never wash from too close
(A) Blasting
(B) Wide Spray
(C) Less than 2 m (80 in.)
(D) Over 2 m (80 in.)
KiSC issued 03, 2010 A