Kubota U48-4, Workshop Manual

Page: 14 / 41

INFORMATION
U48-4,U55-4, WSM
I-8
CARE OF DANGER, WARNING AND CAUTION LABELS
1. Keep danger, warning and caution labels clean and free from obstructing material.
2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing danger, warning and caution labels with new labels from your KUBOTA dealer.
4. If a component with danger, warning and caution label(s) affixed is replace with new part, make sure new label(s)
is (are) attached in the same locations(s) as the replace component.
5. Mount new danger, warning and caution labels by applying on a clean dry surface and pressure any bubbles to
outside edge.
RY9212007INI0015US0
KiSC issued 03, 2010 A