OPERATING THE MOWER
28
ADJUSTING THE CLAMP
To avoid personal injury:
A
Shut off the engine and remove the key.
Make sure the mulching cover is fixed securely. If not,
adjust the clamp stay and the hook plate to fix it.
B
Side Discharge Position
1. Hang the rear part of the mulching cover on the hook
in the rear of the mower deck.
2. Loosen the bolts of the clamp stay.
3. While pushing the mulching cover to the mower deck
stopper, fasten the clamp.
4. Adjust the clamp stay so that the clamp would not be
loosen, and then fasten the bolts securely.
B
Mulching Position
1. Put the mulching cover in the mulching position.
2. Loosen the bolts of the hook plate.
3. While pushing the mulching cover to the front fully,
fasten the clamp.
4. Adjust the hook plate so that the clamp would not be
loosen, and then fasten the bolts securely.
A
Do not touch the clamp stay for adjusting the
clamp in the mulching position.
(1) Clamp
(2) Clamp stay
(3) Stopper
(4) Bolt
(5) Mulching cover
(1) Discharge deflector
(2) Mower cover
(3) Mulching cover
(1) Clamp
(2) Hook plate
(3) Bolt
Summary of Contents for T1880
Page 7: ......
Page 12: ...5 SAFE OPERATION 6 DANGER WARNING AND CAUTION LABELS ...
Page 13: ...SAFE OPERATION 6 ...
Page 15: ......