Kubota SSV65, Operator'S Manual

Page: 49 / 125

23 CHECKS BEFORE START
C Removing
1. The operator should be in the operator's seat with the
seat belt fastened.
2. Start the engine and set the parking brake switch to
the parking position.
3. Slowly raise the lift arms to the maximum height and
stop the engine.
4. The second person must remove the lift arm stopper.
5. Start the engine and lower the lift arms fully to the
ground and stop the engine.
6. Return the lift arm stopper to the storage position and
secure with knob bolt.
7. Remove the jack stands.
DOOR AND WINDOWS
B
Opening/Closing of Cab Door (Closed cab
model)
To avoid personal injury or death:
A
Keep hands and feet away from the area
between cab door and cab frame. Otherwise
the operator risks serious injuries by pinching
or crushing.
A
Other persons should stay away when opening
the cab door.
C
To open the cab door from outside, follow the
steps below.
1. Unlock the cab door and push the button. The cab
door will open upward.
2. Push the cab door all the way up until it locks to the top
of the cab.
3. After opening, lock in place by moving both lock pins
to outside to prevent door from inadvertently falling.
C To close the cab door from outside, follow the
steps below.
1. Before closing, unlock in place by moving both lock
pins to inside.
2. Push the lock lever at the bottom of the cab door and
slowly lower the cab door half way.
3. Grasp the top handle and pull it toward yourself to
latch the cab door.
(1) Button
(1) Lock pin (A) "LOCK"
(B) "UNLOCK"
(1) Lock lever (bottom)
(1) Top handle