Model KA-2200 SEROMATIC
II
Maximum Speed
●
4,700rpm/RS-110 rotor, 3,100rpm/seromatic rotor
Maximum RCF
●
2,000 xg/RS-110 rotor, 1,000 xg/seromatic rotor
Maximum Capacity
●
12mL/RS110 rotor, 72mL/seromatic rotor
Speed setting
●
Three stages by switching the push button
Timer setting
●
Three stages by switching the push button (timer is changeable)
Power requirements
●
Single phase 110/115V±10%, 50/60Hz, 5A
Single phase 220/230V±10%, 50/60Hz, 3A
Rated voltage and rated current
●
110/115V, 50/60Hz, 0.8A 220/230V, 50/60Hz, 0.4A
Power consumption and heat output
●
73W/HLA, 52W/SERO, 260kJ/h
Size, weight
●
23(W) x 27(D) x 25(H) cm, 10kg height when the lid is opening 51cm
✳
1
Copyright © 2018 KUBOTA CORPORATION V-NOV, Printed in Japan
29-9 Hongo 3-chome, Bunkyo-ku, Tokyo 113-0033, Japan
Tel +81 3 3815 1331 Fax +81 3 3814 2574
• The term of supplying spare parts for repair is 7 years after discontinuation of production (except spare parts which we are unable to procure).
• This catalogue is not for distribution in the USA, Canada and Mexico as products shown are not for sale in these countries.
To use the equipment safely, be sure to read
the instruction manual carefully before you start
operations.
Products in this catalogue are designed for use only by people who have the requisite technical knowledge, and must always be used
with considerable care and only for their intended purpose. People who do not have adequate technical knowledge or training should
only use the products under appropriate supervision by someone with expert knowledge, or else accidents are likely to occur.
IMPORTANT
If any of the cases listed at the left occurs,
immediately turn off the power, disconnect
the power cable plug or connecting
terminals from the main power outlet, place
a “Do not use” sign on the unit, and contact
the nearest branch of Kubota Corporation.
Do not misplace the instruction manual.
Keep the instruction manual nearby so that you can refer
to it whenever necessary.
• The rotor or buckets appear to be damaged or corroded.
• When the replacement period (years of operation, operating lifetime)
of a rotor has passed.
• The equipment emits a burning smell or becomes abnormally hot.
• You receive a weak electric shock when you touch the equipment with
your bare hands.
• When any other abnormality or indication of failure is noticed.
Safety
Precautions
Prohibited
Kubota has acquired ISO 9001 and ISO 13485 certification.
Precautions
for use
Please immediately
stop using
the products in any
of the cases listed
on the right.
Specifications
(
✳
1) Not including projections.
All specifications and external appearance subject to change without notice.
* Use only rotors, adaptors and tube racks made are KUBOTA. Do not attempt to use rotors, adaptors or tube racks made by other manufacturers.
* Follow all instructions in the relevant Instruction & Service Manual when operating centrifuges.
www.centrifuge.jp
