Kubota RTV1140 CPX, Operator'S Manual

Page: 40 / 104

OPERATING THE VEHICLE 18
B
Work Light (Front/Rear)
[if equipped]
When the key switch is turned to the "ON" position and the
slide switch at the rear of each work light is slid to the "ON"
position, the work light comes on. When the slide switch
is slid to the "OFF" position, the light goes off.
After the slide switch for each work light is shifted to the
"OFF" position, turn the key switch to the "OFF" position.
B
Brake Pedal
To avoid personal injury:
A If the operator suddenly brakes, an accident
may occur due to loss of control or the shifting
forward of heavy loads.
A
When driving on icy, wet or loose surface,
make sure the vehicle is correctly ballasted to
avoid skidding and loss of steering control.
Operate at reduced speed.
The brake pedal is the left pedal on the foot board.
Depress the pedal to slow or stop the vehicle.
(1) Work light (if equipped)
(2) Work light switch (if equipped) (A) "ON"
(B) "OFF"
3. Checking the brake pedal.
(1) Brake pedal