SEATING AND CARGO BED
30
CHANGING SEATING AND CARGO BED
To avoid personal injury:
A
Be sure to lower the cargo bed, stop the engine
and apply the parking brake before changing
seating and cargo bed.
C
2 row seating to 1 row seating
1. Unhook the upper and lower latches on both sides of
the screen, and slide the screen forward.
2. Hook the upper and lower latches on both sides
securely.
3. Unhook the seat latches and flip up the rear seat
forward.
A
To avoid damage to the rear seat, make sure that the
seat belt receivers are set level against the seat as
shown in the left-side figure below.
(1) Upper latch
(2) Lower latch
(3) Screen
(A) "PULL"
(B) "TURN"
(C) "PULL"
(D) "FORWARD"
(1) Upper latch
(2) Lower latch
(3) Screen
(A) "PULL"
(B) "TURN"
(C) "RELEASE"
(D) "PUSH"
(1) Seat latch
(2) Rear seat
(A) "UNHOOK"
(B) "FLIP UP"
(1) Seat belt receiver
Summary of Contents for RTV1140 CPX
